360 build

[ZippyDSMlee]

I like this case
http://www.consolesource.com/ecomm/catalog/Xbox-360-XCM-Black-Knight-Full-Case-p-2423.html

and I want to put a fan on top of it http://www.directron.com/uc12eb.html

or

http://www.directron.com/a2368.html

or

http://www.directron.com/ledblue120.html

then have a nice chrome face plate on it,I cant seem to find any low profile 120mm fans...sad...mmmm might go all out with lights and a better fan and use a ac/ds adapter to power it.
I dunno just thinking about what to do with it.

anyone know how a 120 25MM thick fan would fit onto a 360,I am pretty sure theres only 5MM of clearance or less of space under the casing I need a low profile 120 fan....mmmmm

[steelcobra]

The first link got edited down and doesn't work.

[ZippyDSMlee]

The first link got edited down and doesn't work.

its a nice simple black case,however the XCM one with the X on it


http://www.consolesource.com/ecomm/catalog/Xbox-360-XCM-Black-Full-Case-X-BLUE-p-2447.html
is nice,need to do something about the ugly green led *L*

I don't care for green,red and black is ok but black and blue is mesmerizing 0_o

[ZippyDSMlee]

Internal fan sets and Blue LED temp sensor

Sensor (http://www.maxconsole.net/?mode=content&itemid=225)
internal dual front fan (http://www.ludogaming.com.au/xbox-360/cooling/xbox-360-talismoon-whisper-replacement-fan-blue-/prod_5.html)
Internal vent fan (http://www.ludogaming.com.au/xbox-360/cooling/xbox-360-xcm-high-speed-fan-blue-lights-/prod_41.html)


In this case
http://www.consolesource.com/ecomm/catalog/Xbox-360-XCM-Black-Full-Case-X-BLUE-p-2447.html


I don't think I would need to use the case LED.

I'd go for the lower power fans the 360 is bad about power distro anything more than 2 fan sets would probably be to much for it,altho I forget lower RPM means lower power I ahve not seen any fans that use lower amp but are higher rpm....mmmmm

[steelcobra]

With fans, what's important is the size. Big fans move more air at lower speeds. A pair of 120mm's are good enough to blow air through a gaming rig, so I think 90's or better would be fine for a 360.

[ZippyDSMlee]

thanks.
I got some PS2s in to fix up I'll sell them off before I try a 360.
I wonder if I can find any lighted PS2 cases *L*

[steelcobra]

You could always mod the case yourself. A dremel and some acrylic plates are quite versatile.

[ZippyDSMlee]

You could always mod the case yourself. A dremel and some acrylic plates are quite versatile.

I dremel ,drill and drive like I speak .....drunkly 0-o

LOL


Mmm I could get a slim fan some led and put a hole over the left half of the PS2 over the heat sink and cap it with a fan grill cover.

seems all I can find are clear cases personally I hate them,its like cleavage on women the less the more interesting things are :P

[ZippyDSMlee]

found some things for the Xbox


http://www.divineo.com/cgi-bin/div-us/zz-xb-halo.html
http://www.divineo.cn/cgi-bin/div-cn/xb-cplkit.html

all using the normal black case,I might toss in a fan once I fig out what the power usage on the fans are..

[ZippyDSMlee]

can you help me find the halo game symbol I want to take this
http://store.yahoo.com/directron/el06bl.html

and put it in shape,either weave it in and out of the plastic to form the symbol or use soemthign to cover the parts.

[steelcobra]

Which symbol?

[ZippyDSMlee]

Which symbol?

the main one the oval from top to bottom one.

[ZippyDSMlee]

the main symbol of 1 or show me a few pics of them.

anyway how do you think a green halo case with silver or black or matalic black sprayed to the inside wil look.